Flashni Xenon Beacons Solista Beacon CHQ-AB Beacon XP95 Beacon Vantage Beacon Vantage Combi Sounder/Beacon

 

	Flashni  A compact combination of a high output sounder and beacon for areas requiring both audible and visual indication of alarms, ideal for use in elderly peoples dwellings or noisy manufacturing areas. Common connection terminals saves installation time while the use of universal bases allows the units to replace Roshnis if building requirements change.
	Xenon Beacons  The XL range has been developed as a high output range of xenon beacons for industrial, commercial and other general purpose alarm situations, where reliability and performance are paramount. The xenon tube produces a massive 10 joule output which is concentrated by a further 20% by the use of a carefully designed dioptic lens. With a choice of single or double flash operation the XL range offers reliable, high output performance with a minimum power requirement. XL, like the matching RL range, shares the same versatile options for lenses and mounting accessories. (Note: if used on electrically propelled vehicles an EDV regulator is essential) Intelligent Xenon Beacons  Offering maximum efficiency and reliability these beacons are suitable for a wide range of fire, security and industrial applications particularly where high noise levels or ear defenders might affect the audibility of sounders alone. The unique feature of the range is the suppression of current surge at switch-on for the 1W & 2W versions and active current management and selectable flash rate for the 5W variant. Control of current surge alleviates the associated problems of fuse failures, relay contact damage and high power supply ratings. Additional features include a constant flash rate and stable flash intensity over their specified voltage range. Approved versions to VdS requirements.
	Solista Beacon - SB1 Fulleon’s Solista LED beacons bring the dual benefits of ultra-low current consumption and extremely long service life. Available as individual or integrated with sounders they are ideally suited to modern systems with limited power delivery. Facilities are included for the fitting of address boards. Features ULTRA-LOW CURRENT CONSUMPTION: 3mA OR 6mA @ 24v HIGH RELIABILITY LONG OPERATIONAL LIFE FIXINGS FOR ADDRESS CARDS   Model SB1 Nominal Voltage 24Vdc Current Consumption (tone dependant)      Between 3mA - 6mA IP Rating IP65 Lens Colour Red Flash Rate 30 or 60 per min (switch selectable) Beacon Type LED
	Hochiki CHQ-AB Addressable Beacon Hochiki's newest addition to the ESP® range is the CHQ-AB Addressable Beacon. The CHQ-AB is loop-powered and is fully compatible with Hochiki's ESP® range of Bases.  The innovative high-intensity LEDs and lens design produces a highly visible flash whilst the casing exactly matches the Hochiki ESP® Sensor range in shape and colour providing seamless integration.  The CHQ-AB can be used on the existing Standard ESP® Base (YBN-R/3), Base Sounder (CHQ-BS) and the Short-Circuit Isolator Base (YBO-R/SCI). Key Benefits: High Intensity LED technology Low current consumption 1Hz flash frequency Addressable via Hand Held Programmer (TCH-B100) Up to 127 devices per loop
	Apollo XP95 Loop Powered Beacon Apollo's Loop-Powered Beacon has been developed as a supplement to sounders for use in situations where there is a risk that sounders may not be heard. These include: where there is a risk that sounders will not be heard due to, for example, high background noise where the occupants are deaf or hard of hearing It can also be used in enviroments where a 'staff alarm' is preferable, for example in hospitals, or where sounders are undesirable, such as in TV or radio stations or in cinemas. The beacon: is designed for indoor use is lockable, like a detector has a wide angle of visibility is loop-powered has a low current consumption - just 3mA uses LEDs complies with BS5839-1: 2002 The beacon can be connected to detection systems using XP95 or Discovery detectors. However, the features of the beacon are only available when it is connected to a control panel with the appropriate software. The beacon is fitted to any XP95 or Discovery base and would normally be wall mounted. Alternatively it can be used in combination with Apollo sounders. If the beacon is fitted to an Apollo Ancillary Base Sounder, the sounder will be controlled by the beacon; if it used with an Intelligent Base Sounder, the beacon is fitted to a mounting base which in turn is fitted to the Intelligent Base Sounder. By doing this, the devices can be controlled separately. The beacons can be synchronised with each other and with Apollo sounders. Up to 20 beacons may be fitted between standard XP95 isolators or isolating bases. A loop loading calcuation should be made in order to determine the exact number in a loop. A loop calculation programme is available as a free download from this site. Please click here for more details.

	Vantage Beacon Using the latest developments in surface mount LED technology, the new Vantage beacon is big on light output but small on power requirements. The Vantage beacon is ideal for applications requiring an additional light output, and is particularly useful for installing into existing alarm systems, as its low power requirement means that system designers need not contend with the usual problems of additional power supplies. Low current also reduces the need for additional battery back-up when larger numbers of beacons are required.The Vantage beacon is available with a number of different lens colours, including red, blue, clear and amber. Installation is via a 6-way 45 degree terminal block situated on the underside of the beacon, resulting in a clean and rapid installation utilising either of the Vantage mounting base options. Quick fit installation is achieved by the bayonet fixing arrangement on both types of mounting base, which includes a locking feature.
	Vantage-Combi Sounder/Beacon An innovative approach to design means light output from the Vantage-Combi is efficiently produced via a new low current LED cluster. Vantage-Combi is ideal for applications requiring an additional light output eg sheltered accommodation, hospitals and airports. Synchronisation of light output is standard, as is the option to operate the Vantage-Combi as a flasher/beacon only. Low current reduces the need for additional battery back-up when larger numbers of combination sounder beacons are required. The Vantage-Combi is available either in a red or white body with lens options of red, amber, clear and blue. Tone and volume selection on Vantage-Combi is via a four-way DIL switch.The Vantage also offers two mounting base options. The first is a shallow base with easy access through into the main sounder body, reducing installation time. Vantage-Combi Sounder Beacons utilises the Vantage mounting base system and may be locked in place if required.