Fire Safety, Security & Compliance Glossary

Explore UK fire safety terminology, regulations, standards and technical definitions covering fire detection systems, emergency lighting, safety signs, fire extinguishers, communication and call systems, security products, access control, CCTV and regulatory compliance.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
A

An electronic security system used to control and monitor access to authorised areas of a building through credentials such as key cards, fobs, PIN codes, mobile devices or biometric identifiers.

A fire alarm system where every detector, call point and device has a unique address, allowing the control panel to identify the exact location of an alarm, activation or fault. Explore Addressable Fire Systems at Firesense here

A nurse call system in which individual call points and devices have unique identities, allowing staff to see where assistance is required. Firesense lists both conventional and addressable nurse call products.Browse addressable nurse call systems at Firesense here

A system used to automatically transmit fire alarm activations and fault conditions to an Alarm Receiving Centre or monitoring service.

A smoke ventilation device designed to remove smoke and heat from a building during a fire, helping to improve visibility and support safe evacuation.

A designated safe location where occupants gather following an evacuation to allow roll calls and account for all personnel.

A highly sensitive fire detection system that continuously samples air through pipework and analyses it for smoke particles, often used in critical and high-value environments.Shop for aspirating smoke detection at Firesense.

An access credential is an item or digital identifier used to verify a person’s permission to enter a building or restricted area, such as a card, fob, PIN or mobile credential.

Alarm verification is a process for checking and assessing a fire alarm signal in accordance with the system design and site procedures before determining the appropriate response.

Automatic Number Plate Recognition (ANPR) uses cameras and software to read vehicle registration plates, commonly for vehicle access control, parking management and security monitoring.

Approved Document B provides guidance on meeting the fire safety requirements of the Building Regulations in England, including means of escape, fire spread and access for fire services.

B

A rechargeable battery that keeps a fire alarm, security or life-safety system operating when the normal mains supply fails. Battery condition and capacity must be suitable for the system and its required standby period.

A smoke detection device that uses a projected beam to detect smoke across large open spaces such as warehouses and atriums.Explore Firesense's range of beam detectors here.

An access control solution that uses unique biological characteristics such as fingerprints, facial recognition or iris scanning to authorise access.

The British Standard covering the design, installation, testing and maintenance of emergency lighting systems in the UK.

The British Standard governing the design, installation, commissioning and maintenance of fire detection and fire alarm systems in non-domestic premises.

The British Standard covering fire detection and fire alarm systems within domestic premises including houses, flats and HMOs.

The part of the BS 5839 series covering the design, installation, commissioning and maintenance of emergency voice communication systems. It is relevant to systems such as disabled refuge and fire telephone communication equipment.

BS 7273 is a series of British Standards covering the actuation of fire protection measures, including interfaces such as door release mechanisms and other equipment linked to fire alarm systems.

BS 8629 provides a code of practice for the design, installation, commissioning and maintenance of evacuation alert systems for use by the fire and rescue service in buildings containing flats.

BS 9991 provides recommendations for fire safety in the design, management and use of residential buildings.

BS 9999 provides a code of practice for fire safety in the design, management and use of buildings, primarily those that are not residential buildings.

BS EN 54 is a series of European standards covering components and requirements for fire detection and fire alarm systems.

A bullet camera is a cylindrical CCTV camera commonly used to monitor specific areas, entrances, perimeters and outdoor spaces.Search for Bullet cameras here

C

A manually operated device that allows building occupants to activate a fire alarm system when a fire is discovered.Search for call points here.

A device that monitors the air for carbon monoxide, a colourless and odourless toxic gas produced by incomplete combustion. When the concentration reaches its alarm threshold, it gives an audible and/or connected system warning.Search for your carbon monoxide alarm at Firesense here.

The programmed relationship between fire alarm inputs and outputs that determines which actions occur when specific devices activate.

Closed-Circuit Television systems use cameras and recording equipment to monitor, record and review activity for security and safety purposes. Explore CCTV devices like NVRs, doorbells and cameras at Firesense.

A fire involving solid combustible materials such as wood, paper, cardboard, textiles and many plastics.

A fire involving flammable liquids such as petrol, solvents, paints and oils.

A fire involving flammable gases including propane, butane and methane.

A nurse call arrangement that groups call points into zones or circuits, allowing staff to identify the area from which assistance has been requested. Firesense lists conventional nurse call alongside addressable systems. You can find them to buy here.

A fire extinguisher that discharges carbon dioxide gas to suppress Class B fires and fires involving live electrical equipment. At Firesense, we sell a range of fire extinguishers, you can find them here.

A broad category of systems designed to enable communication, assistance requests and emergency contact within buildings and public spaces. Browse communication and call systems at Firesense.

A fire alarm system divided into zones that identifies the area of an alarm activation rather than the exact device responsible. Browse Conventional Nurse Call Systems here.

A Category L1 fire alarm system provides automatic fire detection throughout all areas of a building, subject to the applicable design recommendations and permitted exclusions.

A Category L2 system provides automatic fire detection in escape routes and in defined rooms or areas identified as presenting particular risks.

A Category L3 system is designed to provide warning early enough for occupants to escape safely, with detection in escape routes and rooms opening onto those routes.

A Category L4 system provides automatic fire detection in defined escape routes, such as corridors and stairways.

A Category L5 system is designed around specific fire safety objectives identified through a fire risk assessment or fire strategy, with detection provided in particular areas.

A Category P1 system provides automatic fire detection throughout the building to help protect property and support early fire intervention.

A Category P2 system provides automatic fire detection in defined parts of a building where property protection is particularly important.

A competent person has the appropriate training, knowledge, experience and skills to carry out a particular fire safety or security task effectively and safely.

D

A removable sensing component fitted to a detector base that identifies smoke, heat or other fire indicators.

A recording device used within CCTV systems to store, manage and review footage captured by security cameras.

The central control unit for a disabled refuge communication system. It receives calls from refuge outstations and allows staff to communicate with people waiting for assistance during an evacuation. Shop for disabled refuge control panels at Firesense.

A fixed call point or hands-free communication unit installed in a designated refuge. It allows a person waiting for evacuation assistance to contact the system control point. Shop for disabled refuge outstations at Firesense

A two-way emergency communication system that allows disabled occupants to communicate with building management or emergency responders during an evacuation. Shop for emergecy call systems at Firesense.

An emergency assistance system designed to allow users to call for help from accessible toilets and sanitary facilities. Browse toilet alarms here.

A compact CCTV camera housed within a dome-shaped enclosure, commonly used for indoor and outdoor surveillance applications.

A security system that enables authorised visitors and occupants to communicate with and grant access through controlled entry points.

A security device used to detect the opening or closing of doors and windows as part of an intruder alarm system.

A dual technology detector combines two detection technologies, commonly passive infrared and microwave, to improve detection reliability and help reduce false alarms.

E

Emergency lighting provided to ensure escape routes remain illuminated during a mains power failure or emergency situation. Shop emergency lighting at Firesense.

A safety sign used to identify evacuation routes, exits and escape pathways during emergency situations. Browse fire exit signs sold at Firesense.

A communication device that provides direct contact with security personnel, building management or emergency services.

Lighting designed to operate automatically when normal electrical power fails, providing illumination for safe evacuation and continued building operation. Shop emergency lighting at Firesense.

A two-way communication system used to facilitate emergency communications between refuge areas, control points and building management.

Emergency lighting specifically designed to illuminate designated escape routes leading occupants safely to an exit. Shop emergency lighting at Firesense.

A specialist system allowing fire and rescue services to initiate evacuation procedures within residential and high-rise buildings.

F

A biometric security solution that authenticates users through facial feature analysis before permitting access.

An unwanted fire alarm activation that occurs without the presence of an actual fire event, often caused by environmental factors or user activity.

A displayed notice providing occupants with instructions on what actions to take if a fire occurs within a building.

Cable selected for use in fire alarm circuits to carry power and/or signals between control equipment and field devices. Cable type and installation method must suit the system design and applicable requirements. Shop fire cable at Firesense.

The central control unit responsible for monitoring, managing and displaying the status of all connected fire alarm devices. At Firesense, we offer a range of fire alarm control panels, such as wireless panels, addressable panels or conventional fire panels.

A module that provides relay contacts from a fire alarm system so that external equipment, such as door releases, plant controls or other building systems, can be activated or signalled when required.

An audible warning device used to alert occupants to a fire emergency and initiate evacuation procedures. At Firesense, we offer conventional sounders, VIDs & VADs, wireless sounders, addressable sounders or 2 wire sounders

A fire suppression device made from fire-resistant material used to extinguish small fires by smothering flames and restricting oxygen.At Firesense, we sell a range of fire extinguishers, you can find them here.

The practice of dividing a building into fire-resistant compartments to limit the spread of fire and smoke.

A specially constructed door assembly designed to resist fire and smoke for a specified period of time.

A safety sign used to identify emergency exits and guide occupants towards evacuation routes. We offer a variety of fire exit signs at Firesense.

A portable first-aid firefighting device that discharges an extinguishing agent to control or put out a small fire. The correct type must be selected for the fire risks present, and extinguishers must be inspected and maintained. At Firesense, we sell a range of fire extinguishers, you can find them here.

A sign identifying the location and, where appropriate, the type of fire extinguisher provided. Clear, correctly positioned signage helps occupants and responders find firefighting equipment quickly. Find fire extinguisher signs to purchase here.

A systematic evaluation of fire hazards, risks and control measures within a premises to help ensure fire safety compliance.

A fire alarm zone is a defined area of a building monitored by a fire alarm system, helping identify the general location of an alarm or fault.

A fire strategy is a coordinated plan setting out how a building is designed and managed to protect occupants and property in the event of a fire.

A dedicated emergency communication system that allows designated personnel, such as firefighters or building management, to communicate between fixed telephone points and a central control point.

G

A broad term encompassing procedures, equipment, systems and regulations designed to reduce fire risks and protect life and property.

H

A fire detection device that activates when a predetermined temperature is reached or exceeded.

An assistive listening system that transmits sound directly to hearing aids equipped with a telecoil function.

Emergency lighting intended to provide illumination for potentially hazardous activities so that processes can be shut down safely.

A formal authorisation process used to control activities such as welding, grinding and cutting that could introduce ignition sources.

I

An assistive listening system that transmits sound directly to compatible hearing aids and cochlear implants, improving speech clarity in public spaces.

A security system designed to detect unauthorised entry into a building or protected area and alert occupants or monitoring services.

An internet protocol camera that transmits video data across a network, allowing remote viewing, recording and monitoring.

A smoke detector that uses a small radioactive source to identify combustion particles, traditionally used for fast-flaming fires.

ISO 7010 is an international standard specifying registered safety signs and symbols intended to communicate safety information consistently.

J

An enclosure used to safely protect and connect electrical wiring within fire, security and emergency lighting installations.

K

An access control device requiring users to enter a numerical code before access is granted to a secured area.

L

Emergency lighting luminaires that utilise LED technology to provide energy-efficient illumination during power failures.

A system specifically designed to protect building occupants by detecting hazards, supporting evacuation and reducing risks during emergencies.

A fire detection method that uses a sensing cable to detect heat along its length. It is useful for long, enclosed or difficult-to-access areas where point detectors may be unsuitable; Firesense lists linear heat detection among its product types.

A fire alarm device that receives both power and communication signals through the system loop wiring.

A measurement of illuminance used to assess the amount of light falling on a surface, commonly referenced in emergency lighting standards.

M

An emergency lighting luminaire that remains illuminated during normal operation and continues to function during a power failure.

A manually activated device, often known as a break-glass unit, used to trigger a fire alarm system when a fire is discovered.

The primary control point within an Emergency Voice Communication or refuge communication system used to manage calls and communications.

The designated routes and provisions that allow building occupants to safely evacuate a premises during an emergency.

A security technology that identifies movement within a monitored area and triggers recording, alarms or notifications.

A fire detector that combines multiple sensing technologies, such as smoke and heat detection, to improve reliability and reduce false alarms.

N

A video recording device that captures, stores and manages footage from IP cameras connected across a network.

An emergency lighting luminaire that remains off during normal operation and automatically illuminates when mains power fails.

A button, pull cord or other activation device that enables a patient, resident or care user to request assistance from staff through a nurse call system.

A communication system used in healthcare and assisted living environments to allow patients and residents to request assistance.

O

Emergency lighting designed to minimise panic and assist safe movement through open spaces larger than escape routes.

A smoke detector that uses light-scattering technology to identify visible smoke particles generated by slow-smouldering fires.

A remote communication point connected to an Emergency Voice Communication system, commonly installed within refuge areas.

P

Fire protection measures built into the structure of a building to resist fire and smoke spread without requiring activation.

A safety sign manufactured using materials that absorb and store light energy before glowing in darkness when illumination is lost.

A Passive Infrared detector used within security systems to identify movement by sensing changes in heat energy.

Equipment that converts and regulates electrical power for a fire alarm, security or call system. A suitable power supply provides the required operating current and, where specified, charging for standby batteries.

A safety sign used to indicate actions that are forbidden, helping to reduce hazards and maintain compliance.

A fire protection system designed primarily to reduce property damage, business interruption and financial losses caused by fire.

An access control device that reads encoded credentials such as proximity cards and key fobs without physical contact.

A CCTV camera capable of pan, tilt and zoom movements to provide flexible surveillance coverage of large areas.

Q

The normal operating condition of a fire alarm system when no alarms, faults or test functions are active.

R

A heat detector that activates when temperature increases rapidly, even if a fixed temperature threshold has not been reached.

A protected location within a building where occupants who require assistance can safely wait for evacuation support.

The primary fire safety legislation in England and Wales that places responsibility for fire safety management on the Responsible Person.

A secondary fire alarm display panel that mirrors information from the main control panel, allowing system status to be monitored remotely.

The individual legally responsible for managing fire safety within a premises and ensuring compliance with fire safety legislation.

S

A safety sign used to indicate escape routes, emergency exits, first aid facilities and other safe conditions within a building.

An emergency lighting system that automatically performs routine testing and records operational status without manual intervention.

A fire alarm device designed to isolate wiring faults, ensuring the remainder of the system continues operating normally.

An evacuation strategy where all occupants are instructed to leave the building immediately following an alarm activation.

A temporary alarm system used on construction sites or other locations where a permanent fire alarm installation may not yet be available or appropriate. It provides a means of warning people of an emergency.

A system designed to manage and remove smoke from a building during a fire to aid evacuation and firefighter access.

A fire detection device designed to identify smoke particles generated by combustion and initiate an alarm response.

An audible notification device used to alert building occupants to a fire alarm activation or emergency condition.

Emergency lighting intended to enable normal activities to continue during a mains power failure.

A fire evacuation strategy where occupants remain within their flats or compartments unless directly affected by fire or instructed otherwise.

T

Emergency lighting designed to provide illumination for a minimum period of three hours following a mains power failure.

A controlled entry solution using physical barriers to regulate and monitor pedestrian access.

A communication system enabling voice contact between two locations, commonly used in refuge systems and emergency assistance applications.

A fire alarm system in which devices communicate with the control panel over a two-wire circuit. Firesense lists 2-wire fire systems as one of its product ranges.

A telephone-style outstation used as part of an emergency voice communication system. It typically provides a handset for communication with the system control point.

A hands-free outstation, commonly installed at a disabled refuge, that allows a user to initiate a call to the emergency voice communication system control point.

U

A backup power system that provides temporary electrical supply to critical life safety and security systems during mains power interruptions.

V

Technology that automatically analyses CCTV footage to identify events, behaviours, intrusion attempts and operational anomalies.

A warning device that uses flashing light signals to alert building occupants to a fire alarm or emergency condition.

A system that provides spoken evacuation messages and emergency instructions instead of, or alongside, traditional alarm sounders.

A central control panel used to monitor and manage communications throughout an EVC or refuge system.

W

A safety sign used to highlight potential hazards and risks that could cause injury or danger.

A fire extinguisher designed primarily for use on Class A fires involving solid combustible materials such as paper, wood and textiles.

A system that detects the presence of unwanted water or leakage and raises an alert so that action can be taken to limit damage. Firesense includes water leak detection in its product-type range.

A fire extinguisher that uses microscopic water droplets to cool flames and reduce oxygen levels around a fire.

A specialist extinguisher designed for Class F fires involving cooking oils and fats, commonly found in commercial kitchens.

A device that holds a fire door open during normal use and releases it automatically when triggered by the fire alarm or a local release mechanism, allowing the door to close and help limit fire and smoke spread.

A fire detection system that uses radio communication between devices, reducing the need for extensive cabling.

X

A commonly specified range of intelligent addressable fire alarm control panels used in commercial and public sector environments.

Y

A warning sign that uses a yellow background to indicate hazards, risks or cautionary information.

Z

A defined area of a building used within fire alarm systems to identify the general location of alarm activations and faults.