We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Aico Ei1030 Radon Sensor
DELIVERY
We always aim to same day dispatch on all orders received before 2.30pm.
TRADE COUNTER
Firesense also offer the ability to collect your order from our trade counter.
Aico EI1030
The Ei1030 is a wireless radon sensor that continuously monitors radon, temperature and humidity, taking readings every 15 minutes. Battery-powered and wall-mounted, it installs without wiring and connects to the Ei1000G Gateway, which sends data to the HomeLINK Dashboard.
Part of Aico’s connected home range, the Ei1030 provides long-term radon data rather than a single test result. It can be specified for new installations or added to properties that already have an Ei1000G Gateway fitted. HomeLINK software licence included.
- Continuous radon, temperature, and humidity monitoring.
- Readings taken every 15 minutes.
- Wire-free, wall-mounted installation.
- Sealed 6-year lithium battery, with no battery changes required.
- Connects to the Ei1000G Gateway required to extract data.
Product Highlights
Continuous radon monitoring, not one-off testing
Unlike a three-month radon test kit, the Ei1030 measures radon, temperature and humidity every 15-minutes, with no laboratory analysis needed. This builds a clear picture of conditions in the property over time.
Quick, wire-free installation
Battery-powered and wall-mounted, the Ei1030 needs no mains wiring. It pairs wirelessly with the Ei1000G SmartLINK Gateway, whether specified as part of a new installation or added to an existing Aico system.
Supporting radon remediation projects
Continuous data helps confirm if radon levels are high before work starts, and shows whether remedial measures such as a radon sump or improved ventilation have reduced them.
More than a radon sensor
As well as radon, the Ei1030 measures temperature and humidity. HomeLINK uses this data to flag indicators of condensation, damp and mould, excess heat, cold home risk and heat loss, all from one device.
Why monitor Radon?
Radon is a naturally occurring radioactive gas that enters buildings from the ground. It cannot be seen, smelt or tasted, so the only way to know the level in a property is to measure it.
In the UK, the Action Level for homes is 200 becquerels per cubic metre (Bq/m³), measured as an annual average, with a Target Level of 100 Bq/m³ after remedial work. UKHSA radon maps show where elevated levels are more likely, but concentrations can vary considerably between neighbouring properties depending on construction, ventilation and ground conditions.
Continuous radon monitoring with the Ei1030 gives a clearer picture than a one-off test. It shows how levels change over time, helps identify which properties need further investigation and confirms whether remedial work has reduced radon levels.
How does the Ei1030 Radon Sensor work?
- Wire-free installation: Battery-powered and wall-mounted, with no mains wiring required.
- Wireless connectivity: The Ei1030 Radon Sensor communicates wirelessly with the Ei1000G SmartLINK Gateway, securely transferring data to the HomeLINK Dashboard.
- Continuous measurement: Measures radon, temperature and humidity every 15 minutes, building a long-term record rather than a single average.
- Data via HomeLINK: Readings are sent through the Gateway to the HomeLINK Dashboard, giving your customer a central view of radon levels across their properties.
Where to install the Ei1030 Radon Sensor
For most homes, install two sensors: one in the living room and one in the main bedroom. Measuring two occupied rooms gives a more accurate picture of exposure than a single reading and follows the standard approach used in UK radon testing. Where a property has a basement or cellar, add a third sensor there, as rooms in contact with the ground can have higher concentrations.
Where not to install the Ei1030 Radon Sensor
Do not install the Ei1030 in kitchens or bathrooms, where high humidity and condensation can affect readings.
| Clearance | No |
|---|
Specifications
| Sensor type: | Radon, Temperature and Humidity |
| Humidity Range (%): | 15-95 Relative Humidity (non-condensing) |
| Temperature Range (oC): | -10 to 40 |
| RF range (m): | >100 in free air |
| RF frequency: | 868.2 MHz (1% duty cycle) |
| Battery type: | 3V Lithium Battery (non-replaceable). |
| Certifications/Approvals: | RF performance to EN 300 220-1, in accordance with EN 300 220-2. EMC performance to EN 301 489-1, in accordance with EN 301 489-3. Safety to EN 62368-1 |
| Dimensions: | D55 mm x W84 mm x H89 mm |
| Weight (kg): | 0.14 |
| Warranty: | 5-year warranty |



